Price: Call for Price
Trailer JACKS, JACKS - DROP-LEG JACKS, SWIVEL MOUNT JACKS, A-FRAME JACKS PIPE MOUNT JACKS
Pipe Mount Trailer Jacks
Pipe or tube is welded to the trailer frame, providing a mount for the jack to pivot -
down for jacking and stabilizing, and up for towing.
14 15 16 17 18 19 20
- Capacity: 2,000 - 7,000 -LBS
- Pivots around a tube that is welded to the trailer frame
- Comes in two styles - top crank or side wind crank
- Held in up or down position by pin
- Mounted typically on the trailer tongue but often
found at side of frame to aid in stabilizing and leveling
- Usually 10" or 15" Lift
Pull Pin Swivel Trailer Jacks
Pull Pin swivel jacks bolt on or weld on to the trailer frame, providing a mount for
the jack to pivot - down for jacking and stabilizing, and up for towing.
- Bolt On Style fits frame sections up to 3" Wide x 5" Tall
- Weld On Style mounts to frame in any convenient location
- Pull pin holds jack in position - pin is pulled to release jack for changing positions
- Capacity: 2,000 - 7,000 -LBS
- Comes in two styles - top crank or side wind crank
- Held in up or down position by pin
- Usually 10" or 15" Lift
Pull Pin Swivel Marine Trailer Jacks
Pull Pin swivel marine jacks typically bolt on to the trailer frame, providing a mount for the
jack to pivot - down for jacking and stabilizing, and up for towing.
- Bolt On Style fits frame sections up to 3" Wide x 5" Tall
- Pull pin holds jack in position - pin is pulled to release jack for changing positions
- Capacity: 800 - 2,500 -LBS
- Typically side wind crank style
- Usually zinc coated for extra corrosion resistance from salt water exposure
- Held in up or down position by pin
- Most common fixture is a caster or double casters
- Usually 10" or 15" Lift
Drop-Leg Trailer Jacks
- Either welded or bolted to side of the trailer tongue or most
forward cross member.
- Capacity: 5,000 - 12,500 - LBS.
- Typical Applications: Agricultural, Industrial and Construction.
- Square cross section offers improved side-load strength over
other designed jacks.
- Drop-leg features enable fast leveling and increased lift
abilities.
- Saves time when raising and lowering:
- Pull the drop leg extension retaining pin to adjust
the inner leg and foot.
- Align holes of the inner and outer drop-leg tubes,
reinsert pin to secure the desired height.
- Crank the jack to raise or low the trailer.
NOTE: Because of the drop-leg feature the required
cranking is reduced.
- Some Brands and Models can be paired with a second jack
(slave) that will work together in tandem enabling a higher
capacity lift. Additionally, some Brands and Models can be
equipped with an electric motor added convenience.
- Lift varies between 18" - 32" depending upon drop-leg length
and travel of the selected jack.
WE SELL ALL TRAILER PARTS AND ALSO INSTALL / SERVICE YOUR TRAILER! PLEASE CALL TO CHECK AVAILABILITY ON ALL PARTS POSTED.
CALL WITH ANY QUESTIONS 918-286-7900
We are open Monday Through Friday 8:00 am to 5:00 pm
WE DO NOT CLOSE FOR LUNCH
Hitch It Trailer Sales, Trailer Parts, Service and Truck Accessories
5866 S. 107th E. Ave
Tulsa, OK 74146
918-286-7900
www.918Trailers.com all Trailer Inventory listed online
Stock #: 7950281
